HILLHOME 2 Pack Non Ticking Wall Clock Movements Mechanism with 4 Pack of Hands Quartz Motor Kit DIY Repair Parts Replacement, 5/32 Inch Maximum Dial Thickness, 1/2 Inch Total Shaft Length

Features:Good clock replacement: This kit is good size replacement both in terms of the shaft and the size of the hands. It can be a replacement for your broken clock. Simple style clock movement: It can match to diverse colors, patterns,shapes clock panel, it will not stand out, good movement will work well. Simple design, easy to use. Wide application: You are enable to use it to repair,replace or make a clock; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Material: plastic and aluminumSecond hand motion: SweepAccuracy Within ±30 seconds deviation each month (in normal temperature)Power: 1.5 V AA 1 x battery (not included) Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.Dimensions:Case size: approx. 56 x 56 x 17 mm (2.2 x 2.2 x 0.67 inches)3 Clock Hands Set:More Choices, Suitable for Different Clock StylesPackage included:2 x Quartz clock mechanism4 x Second hand4 x Minute hand4 x Hour hand 4 X Plastic washer4 X Brass washer4 X Brass nut1 x golden end cap2 x Metal hook2 x Mounting hook1 x User manualKindly note:- The hour and minute hands had a protective plastic coating that needs to be carefully removed. - Be careful not to bend the hands with too much pressure. - Do not tighten the brass hex nut too tight- Press hard to get all clock hands in place- Check if all hands are aligned- Check the size before buying.

• ✔️ High torque movement: long spindle quartz clock replacement movement parts with metal hook and 4 different pairs of hands(3 black and 1 red), good for repairing, replacing or make your own customized clock project by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.
• ✔️Accurate time-keeping&quiet motor:Size-total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches); Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32 inches) thickness clock panel. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; equipped with sweeping motion, no ticking; powered by a AA battery.
• ✔️ Three of most popular clock hands: Different Sizes,Colors and Styles. Meet different needs only in one package,perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge. The Diameter of Clock Panel should be longer than 200 mm / 7.87 in. The clock hands should be less than 210 mm / 8.26 in.
• ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc.
• ✔️ Package contents: 2 clock movement,2 Metal hook,a golden end cap,2 Mounting hook,4 Second hands,4 Minute hands,4 Hour hands,4 Plastic washers,4 Brass washers and 4 Brass nuts,come with the specially designed protect box.